Only logged in customers who have purchased this product may leave a review.
Aspire K2 Vape Starter Kit
Aspire Gusto Mini Vape Kit is a compact pod system device which is capable of being used with the Element NS20 pods. Its’ all in one compact design makes it simple to use and it can be used for both mouth to lung and direct to lung vaping styles.
*Please Note: This is a Semi-Regulated Device designed for advanced users, please read this description in its entirety*
The Uwell Blocks kit is a semi-regulated squonk kit that is recommended only to advanced vapers. Powered by an 18650 vape battery (sold separately) it is capable of a 90W max output. The kit comes complete with the bottom-feeding Nunchaku RDA, that’s compatible with single and dual coil builds.
This kit is constructed from Zinc Alloy, making it very hardwearing. It gets its name from the unique ‘pull’out’ design, to access the battery compartment and squonk bottle you can remove the external shell, by pulling the device apart.
Unlike common squonk mods, the Blocks uses a specially designed pump button that is connected to the bottle, used to pump ejuice to your RDA to saturate your cotton wicks. The squonk bottle is made from solid plastic and is connected to a leak-free valve system.
Much like a mechanical/unregulated device, this mod has a direct power output, that is determined by the Amp output and charge of your batteries, as well as the resistance of the coil you are using. It is because of this, that we only recommend the block to advanced vapers who have a thorough understanding of Ohm’s Law and battery safety.
The Blocks does feature an inbuilt chipset which provides basic safety protections, these include short circuit, overtime, overheat, reverse battery and open circuit protection.
The Nunchaku RDA features a two post clamp deck, that’s compatible with both single and dual coil builds. The brass coating on the deck helps to increase conductivity, for faster and more direct heating.
Fitted with a bottom-feeding pin, the RDA is fitted with a channelling system that allows even dispersion of eliquid to keep your cotton saturated, boosting flavour and avoiding the occurrence of dry hits.
The adjustable dual airflow allows for full control over inhale and cloud production. Restricting the airflow will reduce cloud production and provide a tighter inhale, whereas opening it will do the opposite.
- 1 x Blocks Semi-Regulated Squonk Mod
- 1 x Nunchaku 24mm RDA
- 1 x Spares Bag
- 1 x User Manual
- 1 x USB Cable
- 90W max output
- Requires a single 18650 battery
- Safety chipset
- Pump action squonk
- 24mm RDA
- Two post clamp deck
- Single and dual coil builds
- Bottom feeding pin
- Dual adjustable airflow
SEMI REGULATED MOD ALERT
Top Tips – Semi Regulated Devices are Intended for Advanced Users ONLY
- We don’t recommend building below 0.2 Ohm
- Always use an Ohms Reader to check resistance before using
- For low resistance builds use high Amp batteries
- Ensure your battery wrap is intact
- Ensure your locking switch is activated when not in use
- Store your batteries safely in a case, never loose
- Use a dedicated charger for batteries
- Never leave charging batteries unattended
- Dispose of batteries responsibly
- Avoid short circuits by ensuring coils are installed as per manufacturer instructions
Battery / Amperage Guide (Do Not Exceed Limits)
- 1.0 Ohms – 4.2A Amp Draw
- 0.9 Ohms – 4.6A Amp Draw
- 0.8 Ohms – 5.2A Amp Draw
- 0.7 Ohms – 6.0A Amp Draw
- 0.6 Ohms – 7.0A Amp Draw
- 0.5 Ohms – 8.4A Amp Draw
- 0.4 Ohms – 10A Amp Draw
- 0.3 Ohms – 14A Amp Draw
- 0.2 Ohms – 21A Amp Draw (RECOMMENDED LIMIT)
- 0.1 Ohms – 42A Amp Draw (NOT RECOMMENDED)
- 0.0 Ohms – BATTERY SHORT (DEFINITELY NOT RECOMMENDED)
Please note: This is a semi-regulated vape device, by pushing the fire button you complete a circuit that directly runs power from your battery through the device and into your RDA. We do not advise under any circumstances for a semi-regulated device to be used without a thorough knowledge and understanding of battery safety, battery output, Ohm’s law and vaping in general. This is a vape device for very advanced users only – this should not be used by beginners or casual vapers. If you have any questions or queries regarding semi-regulated devices or vaping in general, please contact us.
Semi-Regulated Squonk Kit, 90W Max Output, BF RDA, Adjustable Airflow
- Battery Capacity: 130mAh
- Battery Type: Integrated
- Coil Resistance: 1.3ohm
- Made In: China
- Mod Features: Fixed Wattage
- Tank Capacity: 0.9ml
- Weight: 14g
- Height: Integrated
- Coil Resistance: 1.3ohm
- Made In: China
- Width: 1.7cm (0.7″)
- Depth:0.9cm (0.4″)