The Uwell Fancier RTA / RDA is a unique rebuildable atomiser intended for advanced users. It has a 24mm diameter, two post Velocity Build Deck and an eye catching colour scheme. This piece of vape hardware really stands out due to the fact that by changing the top cap you can quickly transform it into an RDA (Rebuildable Dripping Atomiser) or RTA (Rebuildable Tank Atomiser).
In RTA mode, this device features a 2ml capacity tank, with a wide juice port that is conveniently located at the top of the tank and is accessible by removing the drip tip and cap. The two post Velocity Deck will fit a variety of coil wire types – including premade coils, but supports dual coil builds only. The cotton wicks are fed upwards into the tank that sits atop the deck allowing juice to flow downwards for consistent wicking.
By removing the top cap and glass section, then replacing it with the alternate top cap – the Uwell Fanicer is transformed into a capable RDA with a 810 drip tip. Still utilising the Velocity Deck there is a generously sized juice well and bottom airflow that has four adjustable airflow slots for a greater degree of control over the inhale and flavour you’ll experience.
When in RDA mode, the Fancier can be fitted with the BF (Bottom Feeding) Pin that comes with the kit, making it squonk compatible.
Overall, the Uwell Fanicer is one of the most versatile rebuildables available on the market today – unique stylings and design make it ideal for advanced users looking to experiment and customise.
- 1 x Uwell Fancier RDA / RTA
- 1 x BF Pin
- 1 x RDA Top Cap
- 1 x Spare Glass Section
- 1 x Spares Kit
- 2 x Premade Coils
- 1 x User Manual
- RTA Mode
- 2ml Tank
- 24mm Diameter
- Top Fill
- RDA Mode
- Squonk Compatible
- Two Post Velocity Deck
- Adjustable Bottom Airflow
Important information about Rebuildable Atomisers:
Rebuildable atomisers are recommended only for experienced users. You should have the knowledge and access to the equipment that is required to set up this atomiser properly.
Before building or using a rebuildable atomiser you should have a thorough knowledge of battery safety, Ohm’s Law and vaping in general.
Before fitting a coil onto your rebuildable atomiser ensure it is in a safe condition and registering the correct Ohmage, this testing and checking can be achieved by using a dedicated Ohmmeter. Coils should not be tested on vape devices.