Vape kits

Vape Kits are made up of a battery and a tank, they offer a complete ready to use set up. Whether you’re new to vaping or an experienced user, you’ll find a range of kits that suit your needs; for creating big clouds, delivering clear flavour and everything in between. The below buttons can be used to help you find your perfect device.














Showing all 5 results

Out Of Stock
2ml 0.17Ω, 0.4Ω



The Council Of Vapor Kratos is a sub ohm vape starter kit intended for advanced vapers. Powered by a large 3000mAh built-in battery and featuring an ergonomic, pen like design, the Kratos is ideal for sub ohm vaping on the go. This kit also comes with the Council Of Vapor Vengeance V2 tank which has a 2ml e-liquid capacity along with a bottom adjustable airflow.


  • 3000mAh Built-In Battery
  • 80W Max Output
  • Sub Ohm Vape Kit
  • Large Firing Button
  • LED Battery Life Indicator
  • 2ml E-Liquid Capacity
  • Dual Adjustable Bottom Airflow
  • Push To Fill Top Mechanism
  • Mesh Coil Options
  • 0.17 Ohm / 0.4 Ohm Coil Resistance

Boasting an 80W max output, the Kratos boasts a simple yet elegant pen-like design which is both pocket-friendly and aesthetically striking. A large firing button serves to activate, lock and unlock the device for simple operation whilst battery life is displayed through the LED indicator lights situated around the button.

The 2ml Vengeance V2 tank has an easy refill method courtesy of the push to fill top cap mechanism, which also seals off e-liquid to greatly reduce the chance of leakage. The dual adjustable airflow slots gives users full control over their inhale. The V2 employs proprietary mesh coils, available in either a 0.17 Ohm variant or a 0.4 Ohm option to suit your vaping style. We recommend pairing this vape tank with high VG e-liquids of 60% and above for optimum performance.


  • Council Of Vapor Kratos 3000mAh Mod
  • Council Of Vapor Vengeance V2 2ml Vape Tank
  • COV Vengeance V2 0.17 Ohm Mesh Coil (pre-installed)
  • COV Vengeance V2 0.4 Ohm Mesh Coil
  • Micro USB Charging Cable
  • User Manual

Important information about sub ohm vaping:

This device is intended for sub ohm vaping. Sub ohm vape kits require a greater amount of knowledge and experience to use safely. They use specially designed coils that register below 1.0 Ohm resistance, for use at higher wattages. These kits will also feature advanced modes that require a knowledge of vaping to be used correctly.

We recommend that when sub ohm vaping, you do not use an e-liquid that has higher than a 6mg nicotine strength, this will be too harsh on the throat. Sub ohm vaping produces more vapour and because of this, an increased throat hit. You should kits like this with a high VG e-liquid, that is 60% VG or higher.

3000mAh Battery, 80W Max, 2ml Tank, Single Button Operation

2ml 0.17Ω, 0.2Ω

3000mAh Battery, 80W Max, 2ml Tank, Single Button Operation

Out Of Stock
Adjustable 2 Post



*Please Note: This is a Semi-Regulated Device designed for advanced users, please read this description in its entirety*

The Uwell Blocks kit is a semi-regulated squonk kit that is recommended only to advanced vapers. Powered by an  18650 vape battery (sold separately) it is capable of a 90W max output. The kit comes complete with the bottom-feeding Nunchaku RDA, that’s compatible with single and dual coil builds.

This kit is constructed from Zinc Alloy, making it very hardwearing. It gets its name from the unique ‘pull’out’ design, to access the battery compartment and squonk bottle you can remove the external shell, by pulling the device apart.

Unlike common squonk mods, the Blocks uses a specially designed pump button that is connected to the bottle, used to pump ejuice to your RDA to saturate your cotton wicks. The squonk bottle is made from solid plastic and is connected to a leak-free valve system.

Much like a mechanical/unregulated device, this mod has a direct power output, that is determined by the Amp output and charge of your batteries, as well as the resistance of the coil you are using. It is because of this, that we only recommend the block to advanced vapers who have a thorough understanding of Ohm’s Law and battery safety.

The Blocks does feature an inbuilt chipset which provides basic safety protections, these include short circuit, overtime, overheat, reverse battery and open circuit protection.

The Nunchaku RDA features a two post clamp deck, that’s compatible with both single and dual coil builds. The brass coating on the deck helps to increase conductivity, for faster and more direct heating.

Fitted with a bottom-feeding pin, the RDA is fitted with a channelling system that allows even dispersion of eliquid to keep your cotton saturated, boosting flavour and avoiding the occurrence of dry hits.

The adjustable dual airflow allows for full control over inhale and cloud production. Restricting the airflow will reduce cloud production and provide a tighter inhale, whereas opening it will do the opposite.


  • 1 x Blocks Semi-Regulated Squonk Mod
  • 1 x Nunchaku 24mm RDA
  • 1 x Spares Bag
  • 1 x User Manual
  • 1 x USB Cable

Mod Features:

  • Semi-regulated
  • 90W max output
  • Requires a single 18650 battery
  • Safety chipset
  • Pump action squonk

RDA Features:

  • 24mm RDA
  • Two post clamp deck
  • Single and dual coil builds
  • Bottom feeding pin
  • Dual adjustable airflow


Top Tips – Semi Regulated Devices are Intended for Advanced Users ONLY

  • We don’t recommend building below 0.2 Ohm
  • Always use an Ohms Reader to check resistance before using
  • For low resistance builds use high Amp batteries
  • Ensure your battery wrap is intact
  • Ensure your locking switch is activated when not in use
  • Store your batteries safely in a case, never loose
  • Use a dedicated charger for batteries
  • Never leave charging batteries unattended
  • Dispose of batteries responsibly
  • Avoid short circuits by ensuring coils are installed as per manufacturer instructions

Battery / Amperage Guide (Do Not Exceed Limits)

  • 1.0 Ohms – 4.2A Amp Draw
  • 0.9 Ohms – 4.6A Amp Draw
  • 0.8 Ohms – 5.2A Amp Draw
  • 0.7 Ohms – 6.0A Amp Draw
  • 0.6 Ohms – 7.0A Amp Draw
  • 0.5 Ohms – 8.4A Amp Draw
  • 0.4 Ohms – 10A Amp Draw
  • 0.3 Ohms – 14A Amp Draw
  • 0.2 Ohms – 21A Amp Draw (RECOMMENDED LIMIT)
  • 0.1 Ohms – 42A Amp Draw (NOT RECOMMENDED)

Please note: This is a semi-regulated vape device, by pushing the fire button you complete a circuit that directly runs power from your battery through the device and into your RDA. We do not advise under any circumstances for a semi-regulated device to be used without a thorough knowledge and understanding of battery safety, battery output, Ohm’s law and vaping in general. This is a vape device for very advanced users only – this should not be used by beginners or casual vapers. If you have any questions or queries regarding semi-regulated devices or vaping in general, please contact us.

Semi-Regulated Squonk Kit, 90W Max Output, BF RDA, Adjustable Airflow

Out Of Stock


  • Pull-on style.
  • Memory foam–cushioned footbed.
  • Cushioned footbed with arch support.
  • Leather upper, lining and sole.
  • Teal sole.
  • Men’s Shoes.

Dual 18650's Required, 177W Output, VW, TC, Gene Chipset, 2ml Tank

Out Of Stock

Wismec Active 2100mAh 80W Vape Kit (Bluetooth Speaker)

  • Pull-on style.
  • Memory foam–cushioned footbed.
  • Cushioned footbed with arch support.
  • Leather upper, lining and sole.
  • Teal sole.
  • Men’s Shoes.

2100mAh Battery, Bluetooth Speaker, 80W Output, 2ml Tank

Scroll To Top

My Shopping cart


No products in the cart.

Shopping Now

Login & Signup